O series FRL is the same as Festo type.it is metal design.the standard 40um filtering grade may easily be replaced by 5um. ...

O series FRL is the same as Festo type.it is metal design.the standard 40um filtering grade may easily be replaced by 5um. ...

Nylon tube: 1)Explosive Pressure:50kg 2)Working Pressure:30kg 3)Temperature: -35C~120C 4)Sizes: 4*2.5,5*3,6*4,8*6 Nylon tube:1)Explosive Pressure:50kg2)Working Pressure:30kg3)Temperature: -35C~120C4)Sizes: 4*2.5,5*3,6*4,8*6,10*8,10*7.5,12*9,14*11,16*12,18*15  Min....

Material : brass Working Temperature -20 to 80 degree centigrade Working Pressure 0~1.0Mpa Suitable Medium air,Vacuum Features:. Push-in fitting are used in pneumatics piping.. The tube fittings come in a wide variety of models to meet all your needs in pneumatics...

QXF type inflation valve accumulator filling nitrogen with one-way valve, the valve with the pneumatic tool to the accumulator,. I. Introduction:QXF type inflation valve accumulator filling nitrogen with one-way valve, the valve with the pneumatic tool to the accumulator,...

Double Acting Pneumatic Cylinder/Pneumatic Actuator-SC Series Cylinder Working Pressure: 0.1~1Mpa Bore: 32~200mm SC series cylinderIt is designed with new seal material and buffer, with low starting pressure, stable operation, good seal, and long service life. It adopts...

1.Working pressure: 0.12-1Mpa 2.Speed Range: 30-800mm/s 3.Bore: 16~125mm 4.Certification:ISO9001 Under the circumstance of same drivers, only 50% of the standard Cylinder installation space is needed * Proximity transducer is flush mounted inside sensor groove, on one...

DNC series are the same as FESTO DNC cylinders appearance, with slot on the cylinder barrel and end covers for magnet sensor Pneumatic cylinder ISO643 DNC Cylinder/Pneumatic Component  Pneumatic Features:1) Working medium: double actions 2) Motion pattern: filtered air 3)...

Material : brass Working Temperature -20 to 80 degree centigrade Working Pressure 0~1.0Mpa Suitable Medium air,Vacuum Features:. Push-in fitting are used in pneumatics piping.. The tube fittings come in a wide variety of models to meet all your needs in pneumatics...

Material : brass Working Temperature -20 to 80 degree centigrade Working Pressure 0~1.0Mpa Suitable Medium air,Vacuum Features:. Push-in fitting are used in pneumatics piping.. The tube fittings come in a wide variety of models to meet all your needs in pneumatics...